威斯尼斯人平台全部网址-2022版app下载

您好,欢迎访问湖北文理学院威斯尼斯人平台全部网址!

设为威斯尼斯人平台全部网址 加入收藏
威斯尼斯人平台全部网址
您现在的位置: 威斯尼斯人平台全部网址 > 科学研究 > 科研成果 > 正文
科研成果

近3年发表学术论文

发布时间:2022-06-09 11:17:38  来源:  阅读次数:

近三年发表学术论文

 

序号 姓名 论文名称 期刊名 刊物级别 年份
1 汪云 Molecular dynamics simulation of sub/supercritical evaporation with n-butanol/n-heptane blended fuel Fuel SCI 2021
2 汪云 Experimental Study on the Degradation Mechanism of LaCoO3-based Symmetric Supercapacitors RSC Advance SCI 2021
3 贾志勇 Highly active methanol oxidation electrocatalyst based on 2D NiO porous nanosheets: a combined computational and experimental study Electrochimica Acta SCI 2021
4 吴华伟 Fault Detection of Wind Turbine Electric Pitch System Based on IGWO-ERF Sensors SCI 2021
5 吴华伟 Review and Perspectives of Machine Learning Methods for Wind Turbine Fault Diagnosis Frontiers in Energy Research SCI 2021
6 吴华伟 Wind Turbine Pitch System Fault Detection Using ssODM-DSTA Frontiers in Energy Research SCI 2021
7 吴华伟 Cost-Sensitive Light GBM-Based Online Fault Detection Method for Wind Turbine Gearboxes Frontiers in Energy Research SCI 2021
8 吴华伟 Cost-Sensitive Extremely Randomized Trees Algorithm for Online Fault Detection of Wind Turbine Generators. Front. Frontiers in Energy Research SCI 2021
9 吴华伟 Fault Diagnosis Method for Wind Turbine Gearboxes Based on IWOA-RF Energies SCI 2021
10 叶从进 Thermal conductivity enhancement of nanofluid by adding multiwalled carbon nanotubes: Characterization and numerical modeling patterns Math Meth Appl Sci SCI 2021
11 李智 Research on damping performance and strength of the composite laminate Scientific Reports SCI 2021
12 辛红敏 study on cutting chip in milling GH4169 with indexable disc cutter materials SCI 2021
13 辛红敏 milling force model prediction considering tool runout with three-teeth alternating disc cutter international journal of advanced manufacturing technology SCI 2021
14 马强 Research on three-phase VSR segmented PI synergetic control strategy based on LCL filter IET Circuits, Devices & Systems SCI 2021
15 辛红敏 Identification of eccentricity for disc milling cutter of indexable two sided inserts Advances in mechanical engineering SCI 2021
16 辛红敏 Tool wear in disc milling grooving of aircraft enginge blisk Iranian journal of science and technology-transactions of mechanical engineering SCI 2021
17 石大排 Optimal Energy Control Strategy of PHEV Based on the Pontryagins Minimum Principle Algorithm Advances in Mechanical Engineering SCI 2021
18 吴华伟 Fault Detection for Pitch System of Wind Turbine-Driven Doubly Fed Based on IHHO-Light GBM Applied Sciences SCI 2021
19 吴华伟 Development of MEMS gas actuator for analyzing a gas mixture Scientia Iranica Transactions B: Mechanical Engineering SCI 2021
20 叶从进 Experimental investigation of temperature
field, defects, and mechanical strength in
dissimilar laser bonding of Ti6Al4V and
polyethylene terephthalate
Journal of Laser Applications SCI 2021
21 汪云 First-principles study of oxygen reduction reaction on Pd-doped LaxSr1-xCoyFe1-yO3-δ cathodes of solid oxide fuel cells International Journal of Hydrogen Energy SCI 2020
22 梅雪晴 Development of the ANN–KIM composed model to predict the nanofluid energetic thermal conductivity via various types of nanopowders dispersed in oil Journal of Thermal Analysis and Calorimetry SCI 2020
23 吴华伟 Hydrodynamic and thermal flow in nanochannel to study effects of roughness by estimation the atoms positions via MD method International Journal of Numerical Methods for Heat & Fluid Flow SCI 2020
24 吴华伟 Heat transfer analysis of energy and exergy improvement in water-tube boiler in steam generation process Journal of Thermal Analysis and Calorimetry SCI 2020
25 万锐 Study on the air-side flow and heat transfer characteristics of corrugated fin under low-pressure environment Experimental Heat Transfer SCI 2020
26 吴华伟 Design and Analysis of the IGBT Heat Dissipation Structure Based on Computational Continuum Mechanics Entropy SCI 2020
27 吴华伟 An Improved Light GBM Algorithm for Online Fault Detection of Wind Turbine Gearboxes Energies SCI 2020
28 马超 Coordination of VMI supply chain with replenishment tactic under risk aversion and sales effort 4OR-A QUARTERLY JOURNAL OF OPERATIONS RESEARCH SCI 2020
29 张海军 Frequency Response Signature Analysis for Winding Mechanical Fault Detection of Power Transformer Using Sensitivity Method International Journal of Applied Electromagnetics and Mechanics SCI 2020
30 吴华伟 Traffic Flow Anomaly Detection Based on Robust Ridge Regression with Particle Swarm Optimization Algorithm Mathematical Problems in Engineering SCI 2020
31 吴华伟 Remaining Useful Life Prediction of an IGBT Module in Electric Vehicles Statistical Analysis Symmetry SCI 2020
32 陈铭 Automating smart Internet of Things devices in modern homes using context-based fuzzy logic COMPUTATIONAL INTELLIGENCNE SCI 2020
33 吴华伟 Fault Detection of Wind Turbine Pitch System Based on Multiclass Optimal Margin Distribution Machine Mathematical Problems in Engineering SCI 2020
34 吴华伟 A New Switched State Jump Observer for Traffic Density Estimation in Expressways Based on Hybrid-Dynamic-Traffic-Network-Model Sensors SCI 2019
35 吴华伟 Development of an SVR Model for the Fault Diagnosis of Large-Scale Doubly-Fed Wind Turbines Using SCADA Data Energies SCI 2019
36 吴华伟 Present a new multi objective optimization statistical Pareto frontier method composed of artificial neural network and multi objective genetic algorithm to improve the pipe flow hydrodynamic and thermal properties such as pressure drop and heat transfer coefficient for non-Newtonian binary fluids Physica A: Statistical Mechanics and its Applications SCI 2019
37 吴华伟 Curve-fitting on experimental thermal conductivity of motor oil under influence of hybrid nano additives containing multi-walled carbon nanotubes and zinc oxide Physica A: Statistical Mechanics and its Applications SCI 2019
38 张海军 Frequency response signature analysis for winding mechanical fault detection of power transformer using sensitivity method International Journal of Applied Electromagnetics and Mechanics SCI 2019
39 吴华伟 基于mcODM-STA 的风电机组变桨系统故障诊断 湖南大学学报(自然科学版) EI 2021
40 吴华伟 Simulation on Dynamic Load Balancing of Distributed Parallel Computing Network System International Journal of Internet Protocol Technology EI 2021
41 王书贤 Light-weighting of Wishbone Finite Element Analysis Engineering Transactions EI 2021
42 吴华伟 Deformation detection algorithm of shallow and large-span tunnel support structure based on wireless sensor network International Journal of Internet Protocol Technology EI 2020
43 刘祯 发动机余热回收用涡旋膨胀机涡旋盘变形分析 内燃机学报 EI 2020
44 吴华伟 Intelligent switching algorithm for mobile communication under non-uniform distribution of scatterers International Journal of Internet Protocol Technology EI 2020
45 张远进 Prediction of Aircraft Optimal Slip Rate Based on IFABP Neural Network journal of applied science and engineering EI 2020
46 程清思 Research on vibration characteristics of a multi-barrel artillery Journal of Vibroengineering EI 2019
47 吴华伟 Research on lifetime distribution and reliability of IGBT module based on accelerated life test and K-S test International Journal of Engineering Systems Modelling and Simulation EI 2019
48 刘祯 涡旋压缩机切向泄漏瞬态流场特性 储能科学与技术 CSCD 2021
49 张远进 基于AUKF-BP神经网络的锂电池SOC估算 储能科学与技术 CSCD 2021
50 辛红敏 TC4钛合金盘铣开槽加工残余应力研究 宇航材料工艺 CSCD 2021
51 陈铭 “双一流”建设背景下地方性高校自动化专业教学模式的提升与研究, 《摩擦学学报》 CSCD 2021
52 王敏旺 一种面向电池组均衡模型的定量评价体系 储能科学与技术 CSCD 2021
53 汪云 废塑料热解制备碳纳米管的研究进展 塑料工业 CSCD 2021
54 马超 努力效应和损失规避下具缺货损失的收益共享契约 统计与决策 CSCD 2020
55 辛红敏 TC4钛合金盘铣开槽加工残余应力 宇航材料工艺 CSCD 2020
56 陈铭 虚拟仿真在化工试验教学中的应用研究 《塑料工业》 CSCD 2020
57 张远进 基于IFA-EKF的锂电池SOC估算 储能科学与技术 CSCD 2020
58 聂金泉 应用于电动汽车复合储能系统的升压型直流变换器控制策 储能科学与技术 CSCD 2019
59 吴华伟 基于萤火虫神经网络的动力电池SOC估算 储能科学与技术 CSCD 2019
60 王敏旺 基于落差式组合策略的串联锂离子电池组均衡方案 储能科学与技术 CSCD 2019
61 刘祯 压缩空气储能用涡旋膨胀机非稳态流动特性分析
储能科学与技术
CSCD 2019
62 刘祯 不同膨胀状态下涡旋膨胀机非定常流动特性分析
储能科学与技术
CSCD 2019
63 张海军 基于有限元的电力变压器绕组弹塑性变形分析 高压电器 CSCD 2019
64 邓利军 汽车前防撞梁的耐撞性与轻量化优化设计 现代制造工程 核心 2021
65 景文倩 半空间近场声全息技术的等效源配置研究 噪声与振动控制 核心 2021
66 刘祯 基于STAR-CCM+IGBT散热设计及研究 重庆交通大学学报(自然科学版) 核心 2021
67 马强 永磁同步电机的分数阶协同控制器设计 组合机床与自动化加工技术 核心 2021
68 马强 基于RBFNN分段在线优化的VSR无源控制 高技术通讯 核心 2021
69 辛红敏 整体叶盘盘铣开槽刀具优化研究 工具技术 核心 2021
70 辛红敏 TC4钛合金盘铣开槽铣削温度研究 工具技术 核心 2021
71 丁华锋 乏油工况下斜齿轮热弹流润滑特性研究 润滑与密封 核心 2021
72 吴华伟 基于Icepak的多种间隙下IGBT散热器仿真与研究 重庆交通大学学报(自然科学版) 核心 2021
73 马强 基于新型滑模观测器的永磁同步电机无传感器控制 组合机床与自动化加工技术 核心 2020
74 马强 电动公交车驱动与再生制动遗传优化鲁棒控制 机床与液压 核心 2020
75 马强 基于PSO优化的LCL型三相VSR改进无源控制策略 武汉科技大学学报 核心 2020
76 张海军 缺相故障下永磁同步电机电磁径向力动态特性分析 微电机 核心 2020
77 张海军 缺相故障下永磁同步电机电磁振动分析 组合机床与自动化加工技术 核心 2020
78 王书贤 基于MatlabS形无碳小车优化设计 重庆理工大学学报 核心 2020
79 辛红敏 整体叶盘盘铣开槽加工刀具寿命预测 河南科技大学学报(自然科学版) 核心 2020
80 王书贤 基于Hyper Mesh的某轿车白车身模态和刚度分析 重庆理工大学学报(自然科学) 核心 2019
81 吴华伟 基于K-S检验法和ALTAIGBT模块可靠性寿命分布研究 重庆交通大学学报(自然科学版) 核心 2019